Loading... Please wait...

     

$20 MINIMUM ORDER

Add to Wish List

Click the button below to add the Thompson Enamel Transparent - 2335 Peacock Green 2oz to your wish list.

Our Newsletter


Thompson Enamel Transparent - 2335 Peacock Green 2oz

  • Image 1
  • Image 2
Our Price:
$8.40
SKU:
TE-2335-2
Shipping:
Calculated at checkout


Product Description

Metals: Recommended for fine copper, silver and gold
Recommended Firing Range: 1400°–1550°F (760°–845°C)
Firing: Consistent with general firing times.
COE: 275 cubic expansion  
Grade: 80 Mesh
Type: Transparent
Size: 2oz

Thompson Enamel Transparent - Medium Temperature, Medium Expansion enamels are a glass product formulated to create a permanent bond with fine silver, copper, and gold. Bronze is not recommended for enameling. These high quality, acid-resistant, 80-mesh enamels will provide rich, beautiful color for your metal clay work.

Color image are reference for each color on different metal ( It is always prudent to pre-test enamel colors on examples of the workpieces you are using to resolve any slight variances that may occur in different batches of enamel and its performance on your specific metals). *Some color are over Gold.

*The general firing range for Thompson enamels is 1400°–1500°F (760°–815°C). Enamels will fuse in 1 to 4 minutes depending on the color, type and thickness of the metal, and the temperature of the kiln.   A typical firing is 1450°F (790°C) for around 2 minutes.  Enamel powders will change in color after firing.  Refer to the color image for a general indication of the fired result.  Enamel colors may vary slightly from batch to batch, so pre-testing your enamels before using them is recommended.  Bronze is not recommended for enameling.  The enamels are not formulated to adhere to it and will crack or chip off.

Additional Firing Notes:
The copper sample shows how it looks fired over 1030 White, 2040 Clear and directly on copper. If fired directly or over clear the initial firing on should be 1550°F (845°C) to clear the oxides off the metal. The copper should appear clean and bright under the enamel If it appears reddish or mottled it wasn't fired hot enough and/or long enough. Refire at high temperture. Subsequent firings can be at lower temperatures.

Find Similar Products by Category

Find Similar Products by Tag