PLEASE ALLOW 7 - 10 BUSINESS DAYS FOR SHIPPING! The digital SC-3 kiln fires silver clay, decals, china paint, enameling, and glass in minutes up to 2000°F. The SC-3 is popular with seminar teachers because it fires so fast, plugs into a 120 volt outlet. The SC-3, for a digital kiln, is surprisingly affordable. It fires automatically at the rate and temperature you enter. A large, brightly lit display prompts for firing rate, temperature and hold time. Use the hold feature to automatically soak any type of clay silver to its recommended time. The ceramic fiber firing chamber is wrapped in a steel inner case. The outer steel case remains cool due to the layer of air between it and the inner case. In addition, the case is slotted for air circulation. Electrical components, located in the base, stay cool even at extended hold times. The 6 1/2? wide bead door includes a brushed stainless steel mandrel holder. The 1? x 3? window is beveled for a wide view of the kiln interior. Watch your project turn bright red through the window, which is guaranteed up to 2300°F. (Note: Always wear firing safety glasses when viewing the kiln interior.) The fast firing element is embedded in the firing chamber shell. The SC-3 heats from the two sides and back. It includes a top vent for lost wax casting. Each SC-3 includes a 1/4? thick ceramic fiber shelf. Specifications: Max. Temperature: 2000F 1093C Amps: 15 Phase: 1 Watts: 1800 Nema: 5-15P Breaker Size: 20 Circuit Wire Size: 12 gauge TUV tested to CSA and UL Standard 499: Y CE: Y Control Type: Sentry Digital 3-key Glass Control Voltage: 120 Hertz: 60 Sides: 4 Chamber Volume: 0.28 CU.FT. 7.93 litres Chamber Width: 7.75 197 mm Chamber Depth: 8.00 203 mm Chamber Height: 7.75 197 mm Outer Size: 13.30W x 14.00D x 17.00H Inches 338W x 356D x 432H mm